GEt Quote

Monolayer Molybdenum Disulfide (MoS2)

As low as $174.00 $0.00
In stock
SKU# 1181

Single Layer MoS2 Powder and Dispersion

Product Detail

CAS No.: 1317-33-5

Product Name  Type Concentration Stabilizer Package SKU
Monolayer Molybdenum Disulfide (MoS2) Powder

-

-

200mg

MOS2P0002
- - 500mg MOS2P0005
Water Dispersion 1mg/ml LIOH 200ml GLMSW0A2
1mg/ml LIOH 500ml GLMSW0A5
Ethanol Dispersion 1mg/ml LIOH 200ml GLMSE0A2
1mg/ml LIOH 500ml GLMSE0A5

NOTE: This product has a 3 month shelf life unopened and 1 month shelf life after opened. Please use it as soon as possible for best performance. Please refrigerate at 4°C and keep sealed away from light. Once it is opened, please store with Ar/N2 gas bubbles after each opening.

1. Preparation Method

Lithium-based Intercalation Method

2. Characterizations

Composition:

Monolayer Molybdenum disulfide

Appearance:

Black Powder or dispersion

Diameter:

0.2-5 μm‚ mainly concentrate in 1μm-3μm

Thickness:

~1 nm

Monolayer ratio:

>=90%

SEM Image (1) of ACS Material Monolayer Molybdenum Disulfide

SEM Image (2) of ACS Material Monolayer Molybdenum Disulfide

AFM Image (3) of ACS Material Monolayer Molybdenum Disulfide

3. Application Fields

Secondary batteries‚field-effect transistors‚ sensors‚ organic light-emitting diodes‚ memory.

Monolayer Molybdenum disulfide will be supplied as powder or dispersion‚ and it has good solubility in water and ethanol. The dispersion concentration of Monolayer Molybdenum disulfide with small diameter in water will be adjustable in 0.1mg- 5 mg/ml. 

If you have any questions‚ please contact us‚ and we will try our best to provide the solutions for you.

 

Disclaimer: ACS Material LLC believes that the information on our website is accurate and represents the best and most current information available to us. ACS Material makes no representations or warranties either express or implied, regarding the suitability of the material for any purpose or the accuracy of the information listed here. Accordingly, ACS Material will not be responsible for damages resulting from use of or reliance upon this information.

FAQ

1. Is it necessary to remove LiOH before filtering MoS2 on the support membrane?

There is a tiny amount of LiOH in the solution. LiOH is soluble in the solution so it will be filtered with the solution when you filter the MoS2 nanosheets using the membrane. There’s no need to remove LiOH before using it on the support membrane.

2. What is the ratio of 2H/1T phases of monolayer MoS2 powder?

About 60%.

3. What is the production process of conductive monolayer MoS2 flakes?

MoS2 reacts with n-Butyllithium to generate LiXMoS2. Li is between the MoS2 layers. The hydrogen produced by the reaction of Li and H2O can expand MoS2. In other words, LIXMoS2 reacts with water to directly generate MoS2 flakes.

4. How can I ultrasonically disperse monolayer MoS2 powder products in water?

If the cold-dried powder is re-dispersed, the dispersion stability will not be very good due to its low oxygen content. It is recommended that the concentration does not exceed 0.1 mg/mL during dispersion. Generally, 30 minutes of ultrasonication of more than 300 watts is sufficient.

Research Citations of ACS Material Products

  1. Lu, Chang, et al. “Comparison of MoS2, WS2, and Graphene Oxide for DNA Adsorption and Sensing.” Langmuir, vol. 33, no. 2, May 2017, pp. 630–637., doi:10.1021/acs.langmuir.6b04502.
  2. Wang, Liu, et al. “Transition Metal Dichalcogenide Nanosheets for Visual Monitoring PCR Rivaling a Real-Time PCR Instrument.” ACS Applied Materials & Interfaces, vol. 10, no. 5, 2018, pp. 4409–4418., doi:10.1021/acsami.7b15746.
  3. Giust, Davide, et al. "Interactions of DNA coated upconversion nanoparticles with 2D materials." Colloidal Nanoparticles for Biomedical Applications XIII. Vol. 10507. International Society for Optics and Photonics, 2018.
  4. Lau, K. Y., A. A. Latif, MH Abu Bakar, F. D. Muhammad, M. F. Omar, and M. A. Mahdi. "Mechanically deposited tungsten disulfide saturable absorber for low-threshold Q-switched erbium-doped fiber laser." Applied Physics B 123, no. 8 (2017): 221.
  5. Giust, Davide, María Isabel Lucío, Otto L. Muskens, and Antonios G. Kanaras. "Interactions of DNA coated upconversion nanoparticles with 2D materials." In Colloidal Nanoparticles for Biomedical Applications XIII, vol. 10507, p. 105070U. International Society for Optics and Photonics, 2018.
  6. Liu, Yibo, and Juewen Liu. "Hybrid nanomaterials of WS 2 or MoS 2 nanosheets with liposomes: biointerfaces and multiplexed drug delivery." Nanoscale 9, no. 35 (2017): 13187-13194.
  7. Giust, Davide, María Isabel Lucío, Otto L. Muskens, and Antonios G. Kanaras. "Interactions of DNA coated upconversion nanoparticles with 2D materials." In Colloidal Nanoparticles for Biomedical Applications XIII, vol. 10507, p. 105070U. International Society for Optics and Photonics, 2018.