Isostatic chamber check

Which isostatic chamber takes the part?

Enter the size of the pressed part and the allowances for the mold. The tool answers two separate questions: which PressPro™ chambers the sealed mold fits into, and how the force needed for your pressure compares with the rated tonnage of each frame.

Process

Pressed part diametermm

Pressed part lengthmm

Shrinkage on pressing (each dimension, assumed)

Mold wall thickness (0 if none)mm

End closure, each end (0 if none)mm

Target pressure

chamber, cut openpressure liquidmold and closurespowder as filled

Geometry: filled mold = pressed size ÷ (1 − shrinkage), plus wall and closures, with 2 mm clearance on diameter. Load: force = chamber pressure × bore area ÷ 9800, compared with the rated tonnage of the frame. A chamber the mold fits into is not thereby a confirmed configuration. Standard chambers are rated to 300 MPa cold and 200 MPa warm.