Site Check and Request for Quotation

Site check and request for quotation

Choose a press to see its printed footprint, weight, supply and power. Add what you know about the site; each item is checked on its own. Then describe the work and copy the request.

Press family

Model

Supply at the bench

Rated load of the bench or table (optional)kg

Narrowest door on the way in (optional)mm

main unitcontrol boxdoor width

Requirements for the request

Purpose

Sample and material

Die bore, platen footprint or chamber size

Pressure range, MPa

Highest temperature (optional)°C

Atmosphere

Operation

Dies or molds needed

Quantityunits

Delivery and other notes (optional)

Machine data as printed in the PressPro™ specifications. Current = printed maximum power ÷ 220 V, ignoring power factor. The bench check compares the printed machine weight with the total rated load you enter in kg; ratings per length or per area, floor loading, and the weight of dies, samples, chillers or pumps are not evaluated. The door check compares the smaller of the first two printed dimensions of the main unit with the door; packaging, crating and handling equipment are not covered. The requirements you enter are not checked against the chosen model. Whether a model may run on 208 V or 230 to 240 V is not covered by the printed data. Electrical and structural decisions belong to qualified persons on site. The request lists your entries; it is not a quotation.