Polytevo Series High Speed Mixer
Product Detail
Polytevo Series High Speed Mixer (ACS-1001) is a laboratory high-speed mixer with a 9 L mixing chamber, a 1500 r/min stepless-speed stirring paddle and a temperature range of RT to 120°C, used for mixing and coloring PVC resin and for coloring and drying PE and PP pellets.
In the ACS-1001, the stirring paddle on the main shaft inside the bin rotates clockwise and drives the material along the inner wall of the bin and into the material cone, where it tumbles with the up-and-down circulation of the cone. During high-speed movement friction generates heat, and heating or cooling can be added as required to improve the absorption of plasticizers by the resin.
Why choose the ACS-1001
Specifications General — ACS-1001
Swipe horizontally to view all columns.
| Parameter | Specification |
|---|---|
| Brand | Polytevo Series by ACS Material |
| Model | ACS-1001 |
| SKU # | ERP7HSM1 |
| Product Type | Laboratory high-speed mixer |
| Capacity | 9 L (recommended optimal filling volume: 30–60%) |
| Temperature range | RT to 120°C |
| Heating mode | Electric heating or mold temperature controller (selectable); medium interface: H-type M16×1.5 quick connector |
| Cooling mode | Tap water or water chiller; medium interface: H-type M16×1.5 quick connector |
| Number of stirring paddles | 1 |
| Stirring speed | 1500 r/min (stepless speed control) |
| Drive motor | 2 kW servo motor |
| Mixture contact parts | 304 stainless steel |
| Rated torque | 11.5 N·m |
| Power supply (full load power) | AC 380 V ±10%, 50 Hz; 2 kW; three-phase four-wire (L1+L2+L3+PE), no neutral wire |
| Overall dimensions (W × D × H) | 520 × 580 × 1120 mm |
| Weight | Approx. 128 kg |
Where it fits
Frequently asked questions
What is the ACS-1001 used for?
It mixes and colors PVC resin, colors and dries PE and PP pellets, and mixes hygroscopic resins such as ABS and polycarbonate before molding and processing. It is also used in the rubber, pharmaceutical and dyestuff industries.
How does it mix?
The stirring paddle on the main shaft rotates clockwise and drives the material along the inner wall of the bin and into the material cone; the material tumbles with the up-and-down circulation of the cone, and friction generates heat during high-speed movement.
What heating and cooling options are available?
Heating by electric heating or a mold temperature controller, and cooling by tap water or a water chiller, within RT to 120°C. Both use an H-type M16×1.5 quick connector. The heating and cooling configuration is confirmed on the quotation; an external temperature controller or chiller, where used, is supplied separately.
What filling volume is recommended?
The capacity is 9 L and the recommended optimal filling volume is 30–60%.
What power supply does it need?
AC 380 V ±10%, 50 Hz, 2 kW, three-phase four-wire (L1+L2+L3+PE) with no neutral wire.