GEt Quote

Polytevo Series Vertical Transfer Molding Machine

In stock
SKU# ERP7VTMF

Product Detail

Polytevo Series Vertical Transfer Molding Machine (ACS-7003YZ) is a laboratory vertical transfer molding machine with direct pneumatic pressing, a barrel temperature of up to 300°C, a mold temperature of up to 150°C and a charge of about 20 g per shot, used for polymer specimen preparation.

ACS-7003YZ vertical transfer molding machine with heated barrel and pneumatic cylinder
Polytevo Series Vertical Transfer Molding Machine (ACS-7003YZ) — image shown for reference.

The ACS-7003YZ is used together with internal mixers, two-roll mills and twin-screw extruders. Material compounded by an internal mixer or two-roll mill can be transfer molded directly into standard specimens on this machine for subsequent mechanical, thermal and appearance evaluation. It prepares dog-bone (tensile), flexural, impact and color plaque specimens.

Why choose the ACS-7003YZ

Vertical direct pneumatic pressingThe pneumatic cylinder drives the transfer piston downward and forces the material through the runner into the preheated mold cavity.
Independent barrel and mold temperaturesBarrel temperature (up to 300°C) and mold temperature (up to 150°C) are set independently to match different compounds.
Works with compounding equipmentDesigned for use with internal mixers, two-roll mills and twin-screw extruders.
Four specimen typesDog-bone (tensile), flexural, impact and color plaque specimens, selected by the mold.
Split mold with replaceable insertsBy changing the cavity insert, different specimens can be produced on the same machine without replacing the whole mold.
Plunger systemA heated barrel and a transfer piston soften the compound and press it into the mold; the mold is opened after holding pressure and cooling.
Barrel temperature
up to 300°C
Mold temperature
up to 150°C
Charge per shot
≈20 g
Rated air pressure
0.6 MPa
Heating power
1.5 kW

Specifications General — ACS-7003YZ

Swipe horizontally to view all columns.

ParameterSpecification
BrandPolytevo Series by ACS Material
ModelACS-7003YZ
SKU #ERP7VTM1
Product TypeLaboratory vertical transfer molding machine
DrivePneumatic
Heating power1.5 kW
VoltageAC 220 V ±10%, 50 Hz (reliable grounding required)
Barrel temperatureup to 300°C (independently set)
Mold temperatureup to 150°C (independently set)
Rated pressure0.6 MPa (air supply pressure)
Charge per shot≈20 g (depends on compound and specimen)
ApplicationTransfer molds (dog-bone, flexural, impact, color plaque, etc.); molds selected by specimen type
Overall dimensions (W × D × H)600 × 450 × 1500 mm

Matched molds Molds are selected by specimen type

Swipe horizontally to view all columns.

MoldDescription
Flexural / impact bar moldSplit transfer mold with replaceable cavity inserts for flexural and impact bars.
Dog-bone tensile bar moldSplit transfer mold with replaceable cavity inserts for dog-bone tensile bars.
Color plaque moldSplit transfer mold with replaceable cavity inserts for color plaques.

Actual product may vary. Molds are selected by specimen type and confirmed on the quotation.

Where it fits

For preparing standard polymer specimens (dog-bone tensile, flexural, impact and color plaque) for subsequent mechanical, thermal and appearance evaluation, as a supporting unit in plastics, rubber and modified-material laboratories.

Frequently asked questions

What does the ACS-7003YZ do?

It transfer molds compounded material directly into standard specimens: the compound is softened in the heated barrel, the pneumatic cylinder drives the piston down and forces it through the runner into the preheated mold cavity, and after holding pressure and cooling the mold is opened and the specimen removed.

Which specimens can it make?

Dog-bone (tensile), flexural, impact and color plaque specimens, by changing the cavity insert of the split mold.

What temperatures can be set?

The barrel temperature (up to 300°C) and the mold temperature (up to 150°C) are set independently.

What must the user prepare?

A stable, clean air supply at the rated pressure of 0.6 MPa, and AC 220 V ±10%, 50 Hz power with reliable grounding. The mold must be preheated to its set temperature before transfer.

How much material does a shot use?

About 20 g per shot, depending on the compound and the specimen.

Polytevo Series Vacuum Plate Vulcanizing Press — ACS-7006ZGI 30 T vacuum plate vulcanizing press, vacuum 0 to −0.08 MPa, RT to 300°C.
Polytevo Series Benchtop Mini Extruder — ACS-7103E benchtop extrusion system, 20 mm screw, 30 kN PLC mold clamping, up to 400°C.
Polytevo Series Precision Injection Molding Machine — pneumatic ACS-7003 and hydraulic ACS-7003H precision injection molding machines, 20 mm screw.
Polytevo Series Two-Roll Mill — ACS-7007-120 and ACS-7007-150 PLC-controlled two-roll mills, RT to 300°C.
Polytevo Series is a product line of ACS Material, LLC. Disclaimer: ACS Material, LLC believes the information on this page is accurate and represents the best and most current information available to us. Specifications reflect the current published data; final configurations are confirmed at quotation — always refer to the model datasheet for confirmed model-specific specifications, operate the equipment in accordance with its user manual, and follow your laboratory’s safety procedures. ACS Material makes no representations or warranties, express or implied, regarding suitability for any purpose, and will not be responsible for damages resulting from use of or reliance upon this information.