ALab™ dTrite-Pro Electronic Titrator
Product Detail
ALab™ dTrite-Pro Electronic Titrator is a bottle-top electronic titration system. Three sizes are listed — 10 mL, 25 mL and 50 mL — each covering a volume range up to 99.999 mL with the maximum volume per aspiration set by the size. The whole titration process is electronically driven and controlled, supporting standardised operation and data traceability. Three discharge modes and two suction modes are available. A 4.3-inch touchscreen provides on-unit operation, the instrument stores up to 1000 experimental records, and Bluetooth and Wi-Fi functions are included with a 3500 mAh battery. Quality Standard: ISO 8655.
Why choose the dTrite-Pro
Sizes and volume ranges
| Size | SKU # | Volume range | Max. volume per aspiration | Minimum | Suction and discharge speed range |
|---|---|---|---|---|---|
| 10 mL | ALDTRP01 | 0.010–99.999 mL | 10 mL | 10 µL | 10 levels, 0.5–5 mL/s |
| 25 mL | ALDTRP02 | 0.020–99.999 mL | 25 mL | 20 µL | 10 levels, 0.5–5 mL/s |
| 50 mL | ALDTRP03 | 0.020–99.999 mL | 50 mL | 20 µL | 10 levels, 1–10 mL/s |
Volume range and maximum volume per aspiration are separate specifications. ALDTRP codes are ACS Material sales SKUs.
Working accuracy
Systematic error R and variation coefficient CV are specified per size at three subvolumes. Within each size the absolute values in microlitres are the same at all three subvolumes, while the percentages widen as the subvolume falls.
| Size | Subvolume | R · % | R · µL | CV · % | CV · µL |
|---|---|---|---|---|---|
| 10 mL | 10 mL | 0.2 | 20 | 0.07 | 7 |
| 10 mL | 5 mL | 0.4 | 20 | 0.14 | 7 |
| 10 mL | 1 mL | 2.0 | 20 | 0.7 | 7 |
| 25 mL | 25 mL | 0.2 | 50 | 0.07 | 17.5 |
| 25 mL | 12.5 mL | 0.4 | 50 | 0.14 | 17.5 |
| 25 mL | 2.5 mL | 2.0 | 50 | 0.7 | 17.5 |
| 50 mL | 50 mL | 0.2 | 100 | 0.05 | 25 |
| 50 mL | 25 mL | 0.4 | 100 | 0.10 | 25 |
| 50 mL | 5 mL | 2.0 | 100 | 0.5 | 25 |
R is systematic error and CV is variation coefficient. Accuracy is specified only at the subvolumes shown. Do not interpolate or extrapolate between these points.
Product specifications
The following specifications are common to all three listed sizes.
| Parameter | dTrite-Pro |
|---|---|
| Brand | ALab™ by ACS Material |
| Type | Bottle-top electronic titration system |
| Volume Range | By size — see the table above |
| Discharge Modes | Three — single drop · fixed volume · manual |
| Suction Modes | Two — manual · fixed volume |
| Stirring Speed | 5 levels |
| Control Type | Remote support, including stirrers and titration programmes |
| Screen | 4.3-inch TFT colour display, 800 × 480 resolution |
| Memory | 1000 experimental records |
| Connectivity | Bluetooth function · Wi-Fi function |
| Battery Capacity | 3500 mAh |
| Built-in Valve | 0–90° rotation, with rapid exhaust and reagent return |
| Windows | Clear and brown windows are standard; the brown window can be used for photosensitive media such as iodine, potassium permanganate and silver nitrate solutions |
| Drying Tubes | Supplied as standard; a suitable absorbent is not included in the scope of delivery |
| PC Software | Free software is available for upstream control |
| Operating Temperature Range | 10 °C–30 °C |
| Quality Standard | ISO 8655 |
| Dimensions · Weight | Confirm at quotation |
Accessories
| Accessory | Part No. | Function |
|---|---|---|
| Reagent bottle base holder | 17001682 | Increases friction between the bottle base and the workbench, to resist sliding or tipping during use |
| Refill support base | 17001681 | Secures the long inlet tube while connecting the titrator to the funnel base |
| Liquid refill funnel | 17001680 | Allows refilling of the reagent bottle without disassembling the titrator |
| Liquid refill base | 17001679 | The titrator can be placed separately on the workbench |
| Refill funnel | 17900433 | Refill solution into the reagent bottle |
| pH meter | 17900519 | Assists in titration end-point determination |
| Bluetooth printer (thermal) | 17900518 | Prints titration results |
| Colour sensor | 17900541 | Assists in titration end-point determination |
Accessories are listed with their Part No.; package configuration is confirmed at quotation.
Package contents
| Item | Status |
|---|---|
| ACS sales unit | 1 unit |
| Clear and brown windows | Standard |
| Drying tubes | Standard — a suitable absorbent is not included in the scope of delivery |
| Dedicated operating handle | Confirm at quotation |
| Reagent bottle, receiving flask and stand | Confirm at quotation |
| Package contents and configuration | Confirm at quotation |
A bottle-top electronic titration system with three discharge modes, two suction modes, touchscreen control and Bluetooth and Wi-Fi functions. The ALab™ dispensing range also includes the dTrite electronic burette, the DispensMate, DispensMate-Pro and DispensMate-HF bottle-top dispensers, and the dFlow and dFlow-Pro electronic bottle-top dispensers. The dTrite is an electronic burette with a 0.01–99.99 mL range, 10 µL resolution and a built-in magnetic stirrer. The dTrite-Pro is the touchscreen titration system: three sizes, stirring speed in 5 levels, storage for up to 1000 experimental records and free PC software for upstream control.
FAQ
Which size should I choose?
Three sizes are listed: 10 mL, 25 mL and 50 mL. All three cover a volume range up to 99.999 mL; the size sets the maximum volume per aspiration (10, 25 or 50 mL), the minimum volume (10 or 20 µL) and the suction and discharge speed range.
What accuracy is specified?
Per size, at three subvolumes. Within each size the absolute values in microlitres are the same at all three subvolumes — for example 20 µL systematic error on the 10 mL size — while the percentage widens as the subvolume falls, from 0.2% to 2.0%. Accuracy is specified only at the subvolumes listed in the table.
What are the discharge and suction modes?
Three discharge modes: single drop, fixed volume and manual. Two suction modes: manual and fixed volume.
How is it operated?
From the touchscreen on the control unit, or remotely using the dedicated operating handle. Control type: remote support, including stirrers and titration programmes.
What connectivity and result-output options are available?
Bluetooth and Wi-Fi functions are included, the instrument stores up to 1000 experimental records, and free PC software is available for upstream control. An optional Bluetooth thermal printer is listed as accessory Part No. 17900518 for printing titration results. Confirm the applicable connection and record-transfer workflow for the intended setup.
Is end-point determination automatic?
A pH meter (Part No. 17900519) and a colour sensor (Part No. 17900541) are listed as accessories to assist in titration end-point determination. Automatic end-point detection is not specified.
What are the windows and drying tubes for?
Clear and brown windows are standard; the brown window can be used for photosensitive media such as iodine, potassium permanganate and silver nitrate solutions. Drying tubes are supplied as standard for moisture- and CO2-sensitive media; a suitable absorbent is not included in the scope of delivery.
Are dimensions and weight available?
Dimensions and weight: confirm at quotation.
Related
ALab™ is a trademark of ACS Material, LLC. Disclaimer: ACS Material, LLC believes the information on this page is accurate and represents the best and most current information available to us. Specifications are typical and may vary. Refer to the current Technical Data Sheet and quotation for order-specific specifications and configuration details. Confirm chemical compatibility for the intended reagent and concentration before use, and follow applicable laboratory safety procedures for handling acids, bases and solvents. ACS Material makes no representations or warranties, express or implied, regarding suitability for any purpose, and will not be responsible for damages resulting from use of or reliance upon this information.