High Surface Area SBA-15
As low as
$294.00
$0.00
In stock
SKU# MSB15-t
Product Detail
ACS Material High Surface Area SBA-15 is a mesoporous silica prepared by the hydrothermal method and supplied as a white powder with a BET surface area of 700–800 m²/g, a pore diameter of 6–13 nm and a pore volume of 1–2 cm³/g.
Key specifications at a glance
AppearanceWhite powder
BET surface area700–800 m²/g
Pore diameter6–13 nm
Pore volume1–2 cm³/g
Packages10 g / 20 g
Product information
| Parameter | Value |
|---|---|
| Product name | High Surface Area SBA-15 |
| CAS No. | 7631-86-9 |
| Preparation method | Hydrothermal Method |
Characterizations
| Characterizations | High Surface Area SBA-15 |
|---|---|
| Appearance | White powder |
| BET surface area | 700–800 m²/g |
| Pore diameter | 6–13 nm |
| Pore volume | 1–2 cm³/g |
Ordering information
| Product | Package | Product No. |
|---|---|---|
| High Surface Area SBA-15 | 10 g | MSB15111 |
| High Surface Area SBA-15 | 20 g | MSB15112 |
Typical data
Applications
- Catalyst carrier.
- As a templating agent.
- Nanomaterials.
FAQ
What are the key specifications?
White powder; BET surface area 700–800 m²/g; pore diameter 6–13 nm; pore volume 1–2 cm³/g; hydrothermal method; CAS 7631-86-9.
Which packages are available?
10 g (MSB15111) and 20 g (MSB15112).
Where can I find the TDS and SDS?
The Technical Data Sheet (TDS) and Safety Data Sheet (SDS) for this product are available under the price on this page.
Related products
SBA-15 · SBA-16 · MCM-41 · KIT-6
Disclaimer: ACS Material, LLC believes the information on this page is accurate and represents the best and most current information available to us. Specifications reflect the current published data; properties such as surface area and pore size may vary between batches — always refer to the product TDS for confirmed product-specific specifications, and follow your laboratory’s safety procedures for handling fine powders and solvents. ACS Material makes no representations or warranties, express or implied, regarding suitability for any purpose, and will not be responsible for damages resulting from use of or reliance upon this information.