Large-Size Graphite Oxide

Large-Size Graphite Oxide


Availability: In stock

Product Detail

CAS-No.: 7782-42-5

1. Preparation Method

Hummers Method

2. Characterizations 




Brownish grey powder

Monolayer Diameter

10-40 μm

pH (1mg/mL):


Monolayer Rate



~207 m2/g

Carbon Content

~42 wt.%

Oxygen Content

~54 wt.%

Sulfur Content

<1.5 wt.%

Ash Content:

<1.0 wt.%


~207 m2/g

Grain Size:

<80 mesh 

 SEM Large Size Graphite Oxide

Typical SEM Image of ACS Material Large-Size Graphite Oxide

  TEM Large Size Graphite Oxide

Typical TEM Image of ACS Material Large-Size Graphite Oxide

  • Attention: Using an ultrasonic dispersion equipment to peel ACS Material Large-Size Graphite Oxide, will to some extent, lead to a corresponding reduction in the diameter size. Therefore, it is recommended to use a relatively gentle stripping treatment such as mechanical stirring.

3. Application Fields

Graphene and polymers manufacture, water purification, flexible rechargeable battery electrode, optically transparent films, papers, sensors, nanocarriers for metal catalysis, anti-electrostatic additives, adsorption material and biomedicine etc.

Disclaimer: ACS Material, LLC believes that the information in this Technical Data Sheet is accurate and represents the best and most current information available to us. ACS Material makes no representations or warranties either express or implied, regarding the suitability of the material for any purpose or the accuracy of the information contained within this document. Accordingly, ACS Material will not be responsible for damages resulting from use of or reliance upon this information.