GEt Quote

Molecular Sieves, 3A

As low as $156.00 $0.00
In stock
SKU# M3A00000

Product Detail

ACS Material Molecular Sieves 3A (Zeolite 3A) is a microporous potassium sodium aluminosilicate molecular sieve with a pore size of ~3 Å and a SiO2/Al2O3 ratio of ≈ 2. It is supplied as spherical beads in two sizes: Type A, 4–8 mesh (3.0–5.0 mm), and Type B, 8–12 mesh (1.5–2.5 mm).

ACS Material Molecular Sieves 3A, spherical beads
ACS Material Molecular Sieves 3A, spherical beads. Image shown for reference.
Key specifications at a glance
Pore size~3 Å
AppearanceBeads (spherical)
Static water adsorption≥19 wt.% RH 50%, 25 °C
Loss on ignition≤1.50 wt.% 575 °C, 1 h
Abrasion≤0.30 wt.%
Package1 kg

Product information

ParameterValue
Product name3A Molecular Sieve; Zeolite 3A
Chemical formula2/3 K2O • 1/3 Na2O • Al2O3 • 2 SiO2 • 9/2 H2O
Silica-alumina ratioSiO2/Al2O3 ≈ 2
Pore size~3 Å
CAS No.308080-99-1

Characterizations

CharacterizationsType AType B
AppearanceBeads (spherical)Beads (spherical)
Diameter (mesh / mm)4–8 / 3.0–5.08–12 / 1.5–2.5
Static water adsorption (wt.%), RH 50%, 25 °C≥19≥19
Loss on ignition (wt.%), 575 °C, 1 h≤1.50≤1.50
Bulk density (g/mL)≥0.65≥0.65
Abrasion (wt.%)≤0.30≤0.30
Compressive strength (N)≥70≥30
Granularity (%)≥97≥97

Ordering information

TypePackageProduct No.
Type A: 4–8 mesh1 kgM3A01G31
Type B: 8–12 mesh1 kgM3A02G31

Application fields

  • Air drying.
  • Drying of various liquids such as ethanol.
  • Drying of refrigerant.
  • Drying of natural gas and methane gas.
  • Drying of unsaturated hydrocarbons and cracking gas, ethylene, acetylene, propylene and butadiene.

FAQ

What is ACS Material Molecular Sieves 3A?

It is Zeolite 3A, a molecular sieve with a pore size of ~3 Å and a SiO2/Al2O3 ratio of ≈ 2, supplied as spherical beads.

What is the difference between Type A and Type B?

Type A beads are 4–8 mesh (3.0–5.0 mm) with a compressive strength of ≥70 N; Type B beads are 8–12 mesh (1.5–2.5 mm) with a compressive strength of ≥30 N.

What are the key specifications?

Static water adsorption ≥19 wt.% (RH 50%, 25 °C), loss on ignition ≤1.50 wt.% (575 °C, 1 h), bulk density ≥0.65 g/mL, abrasion ≤0.30 wt.% and granularity ≥97%.

Which package size is available?

Both types are supplied in 1 kg packages: Type A (M3A01G31) and Type B (M3A02G31).

Where can I find the TDS?

The Technical Data Sheet (TDS) for this product is available under the price on this page.

Disclaimer: ACS Material, LLC believes the information on this page is accurate and represents the best and most current information available to us. Specifications reflect the current published data; properties such as surface area and pore size may vary between batches — always refer to the product TDS for confirmed product-specific specifications, and follow your laboratory’s safety procedures for handling fine powders and solvents. ACS Material makes no representations or warranties, express or implied, regarding suitability for any purpose, and will not be responsible for damages resulting from use of or reliance upon this information.