GEt Quote

Zeolitic Imidazolate Framework-8 (ZIF-8)

As low as $306.00 $0.00
In stock
SKU# MMZ8

Product Detail

ACS Material Zeolitic Imidazolate Framework-8 (ZIF-8) is a metal–organic framework (MOF) of the zeolitic imidazolate framework (ZIF) subclass, built from zinc ions and 2-methylimidazolate linkers. It is supplied as a white powder with a particle size of 150–500 nm and a BET surface area >1300 m²/g.

Key specifications at a glance
Material classMOF (ZIF)
AppearanceWhite powder
Particle size150–500 nm
BET surface area>1300 m²/g
CAS No.59061-53-9
Package5 g

Product information

ParameterValue
Product nameZeolitic Imidazolate Framework-8 (ZIF-8)
Material classMetal–organic framework (MOF), zeolitic imidazolate framework (ZIF) subclass
FormulaC8H10N4Zn
Molecular weight227.58 g/mol
CAS No.59061-53-9
Preparation methodSolvent Thermal Method

Characterizations

PropertyZIF-8
FormMetal Organic Frameworks (MOFs)
AppearanceWhite powder
Particle size150–500 nm
BET surface area>1300 m²/g

Ordering information

ProductPackageProduct No.
ZIF-8, Type A5 gMMZ8A005

Typical data

Typical SEM image of ACS Material ZIF-8 (x9.00k)
Typical SEM image of ACS Material ZIF-8 (x50.0k)
XRD analysis of ACS Material ZIF-8
ACS Material ZIF-8: Left: typical SEM image, ×9.00k, scale bar 5.00 µm; Middle: typical SEM image, ×50.0k, scale bar 1.00 µm; Right: XRD analysis.

Application fields

  • Catalyst

FAQ

Is ZIF-8 a zeolite?

No. ZIF-8 is a metal–organic framework (MOF) of the zeolitic imidazolate framework (ZIF) subclass, built from zinc ions and 2-methylimidazolate linkers. It is a crystalline coordination polymer, not an aluminosilicate zeolite.

How is ZIF-8 prepared?

ACS Material ZIF-8 is prepared by the solvent thermal method.

Which package size is available?

5 g (MMZ8A005, ZIF-8, Type A).

Where can I find the TDS and SDS?

The Technical Data Sheet (TDS) and Safety Data Sheet (SDS) for this product are available under the price on this page.

Published research using ACS Material ZIF-8

Disclaimer: ACS Material, LLC believes the information on this page is accurate and represents the best and most current information available to us. Specifications reflect the current published data; properties such as surface area and pore size may vary between batches — always refer to the product TDS for confirmed product-specific specifications, and follow your laboratory’s safety procedures for handling fine powders and solvents. ACS Material makes no representations or warranties, express or implied, regarding suitability for any purpose, and will not be responsible for damages resulting from use of or reliance upon this information.