Mesoporous Silica Molecular Sieve KIT-5
As low as
$456.00
$0.00
In stock
SKU# MSKI5
Product Detail
ACS Material Mesoporous Silica Molecular Sieve KIT-5 is a hydrothermally synthesized mesoporous silica powder with an average pore diameter of 4.8 nm, a BET surface area of ~600 m2/g and a particle size of 2–5 µm. It is calcined and ready to use directly.
Key specifications at a glance
Average pore diameter4.8 nm
BET surface area~600 m2/g
Particle size2–5 µm
Na2O≤0.1%
Comparative crystallinity≥90%
AppearancePowder
Product information
| Parameter | Value |
|---|---|
| Product name | Mesoporous Silica Molecular Sieve KIT-5 |
| CAS No. | 7631-86-9 |
| Preparation method | Hydrothermal Method |
| Supplied | Calcined, ready to use directly |
Characterizations
| Characterization | KIT-5 |
|---|---|
| Appearance | Powder |
| Particle size (µm) | 2–5 |
| Average pore diameter (nm) | 4.8 |
| BET surface area (m2/g) | ~600 |
| Na2O (%) | ≤0.1 |
| Comparative crystallinity (%) | ≥90 |
Ordering information
| Product | Package | Product No. |
|---|---|---|
| KIT-5 | 20 g | MSKI5012 |
Typical data
Application fields
- Catalyst carrier
- As a templating agent
- Separation of biochemicals
Published research using ACS Material KIT-5
1.
Nanostructured germanium synthesized by high-pressure chemical vapor deposition in mesoporous silica templates
B. Laubacker, K. Wang, M. Wetherington, et al.
Journal of Materials Science: Materials in Electronics 2023, 34, 741. https://doi.org/10.1007/s10854-023-10101-w
Disclaimer: ACS Material, LLC believes the information on this page is accurate and represents the best and most current information available to us. Specifications reflect the current published data; properties such as surface area and pore size may vary between batches — always refer to the product TDS for confirmed product-specific specifications, and follow your laboratory’s safety procedures for handling fine powders and solvents. ACS Material makes no representations or warranties, express or implied, regarding suitability for any purpose, and will not be responsible for damages resulting from use of or reliance upon this information.