GEt Quote

ZSM-35

As low as $192.00 $0.00
In stock
SKU# 1200

ZSM-35, Powder, 0.5-0.6 nm pore, MR ~15, ~20, ~30 and ~50

Product Detail

ACS Material ZSM-35 is a microporous molecular sieve supplied as a powder in the H+ form, with a pore diameter of 0.5–0.6 nm, a surface area of ~300 m²/g, Na2O <0.1 wt% and crystallinity >95%. Four SiO2/Al2O3 grades are listed: ~15, ~20, ~30 and ~50. This product is calcined and ready to use directly.

This product will be discontinued after supply lasts.

Key specifications at a glance
FormPowder, H+
Pore diameter0.5–0.6 nm
SiO2/Al2O3 molar ratio~15 / ~20 / ~30 / ~50
Surface area~300 m²/g
Na2O<0.1 wt%
Crystallinity>95%

Product information

ParameterValue
Product nameZSM-35
CAS No.1318-02-1
SuppliedCalcined and ready to use directly

Characterizations

CharacterizationsZSM-35 (all grades)
FormPowder, H+
Pore diameter (nm)0.5–0.6
SiO2/Al2O3 molar ratio~15 / ~20 / ~30 / ~50
Surface area (m²/g)~300
Na2O (wt%)<0.1
Crystallinity>95%

Ordering information

ProductSiO2/Al2O3 molar ratioPackageProduct No.
ZSM-35, powder, H+~1520 gMSZ35012
ZSM-35, powder, H+~15100 gMSZ35021
ZSM-35, powder, H+~151 kgMSZ35031
ZSM-35, powder, H+~2020 gMSZ35112
ZSM-35, powder, H+~20100 gMSZ35121
ZSM-35, powder, H+~201 kgMSZ35131
ZSM-35, powder, H+~3020 gMSZ35212
ZSM-35, powder, H+~30100 gMSZ35221
ZSM-35, powder, H+~301 kgMSZ35231
ZSM-35, powder, H+~5020 gMSZ35312
ZSM-35, powder, H+~50100 gMSZ35321
ZSM-35, powder, H+~501 kgMSZ35331

FAQ

What SiO2/Al2O3 molar ratios are available?

~15, ~20, ~30 and ~50. All grades share the same pore diameter (0.5–0.6 nm), H+ form, surface area (~300 m²/g), Na2O (<0.1 wt%) and crystallinity (>95%).

Does ZSM-35 need to be calcined before use?

No. This product is calcined and ready to use directly.

Is ZSM-35 still available?

This product will be discontinued after supply lasts.

Where can I find the TDS and SDS?

The Technical Data Sheet (TDS) and Safety Data Sheet (SDS) for this product are available under the price on this page.

ZSM-5 Series Zeolite Powder · ZSM-11 · ZSM-22 · ZSM-23

Disclaimer: ACS Material, LLC believes the information on this page is accurate and represents the best and most current information available to us. Specifications reflect the current published data; properties such as surface area and pore size may vary between batches — always refer to the product TDS for confirmed product-specific specifications, and follow your laboratory’s safety procedures for handling fine powders and solvents. ACS Material makes no representations or warranties, express or implied, regarding suitability for any purpose, and will not be responsible for damages resulting from use of or reliance upon this information.